BBQDirect.com

1-800-826-9774

Today's Hours - Open until 9pm est

Breckwell SP24I Blazer Pellet Fireplace Insert W/Blower - Heats 2200 Sq Ft

By:Breckwell
Model:SP24I
ID:25
Availability:
In Stock - Ready to Ship

Was$3,299.00

Your Low Price$3,203.23

Free Shipping

Use coupon code: BRECK7 for 7% OFF of your order!

Requires: Flue Vent Piping

Product Specifications and Options

Product Options:

Surround (Required)

Ventilation Kit

Thermostat and Remote Controls

QTY

Breckwell SP24I Blazer Pellet Fireplace Insert W/Blower - Heats 2200 Sq Ft
SKU
SP24I
Weight
225.000000
Manufacturer
Breckwell
Heating BTU
Up to 50,000 BTU's
Approximate Heating Area
400 Square Feet To 2200 Square Feet
Flue Location
Top
Flue Outlet
3" - Up To 15ft | 4" - Above 15ft (Increased At Appliance Collar)
Square Footage
Up to 2,200 sq. ft.
Electrical
120V
Amperage Requirement
15 AMP Circuit
Material
Steel
Hopper Capacity
70 lbs
Type
Brick & Stone Fireplace Insert
Fuel Type
Pellet
Certification
ASTM, ULC and Mobile home approved
Size Range
30" - 39" Wide
Area Heated
2000 - 2499 Sq. Ft
Fireplace Style
Traditional
Minimum Fireplace Dimensions
30”W x 22 1/2”H x 16 3/8”D
Additional Info
Approved for Masonry, Zero-clearance, Mobile Homes, Built-in
Warranty
Lifetime – Fireboxes And Heat Exchangers | 3 Years – Fire Pots And Doors | 1 Year Remaining Components
Resources
You will need Adobe® Acrobat® Reader to view PDF documents.
Safety Information
California disclaimer: PROPOSITION 65 WARNING

REVIEWS (2)

Wonderful
Price
5
Quality
5
Service
5
Wonderful quality product!

Review by jacob - Verified Buyer

Do not buy
Price
1
Quality
1
Service
1
We’ve had this just under a year and we’ve had to replace multiple components. It’s poorly designed and poor quality. Customer service services several other companies so they are entirely unhelpful. I requested a part for my specific model and was sent the wrong part. It’s been a nightmare. Now the auger motor has stopped working again. This will be the second time we’ve had to replace it in addition to waiting for the correct high heat sensor switch. We are unable to use our unit in the middle of winter.

Review by Jones - Verified Buyer

You're reviewing:

Breckwell SP24I Blazer Pellet Fireplace Insert W/Blower - Heats 2200 Sq Ft
Your Rating

Q: Can I install the pellet stove myself?

A: It is certainly possible for a homeowner to install a pellet stove as long as the directions are followed properly. We would never recommend against a professional installing the appliance.

Q: Where does it ship from?

A: This unit ships from North Carolina.

Q: Do you buy used pellet insert and surround?

A: No, we do not purchase used products.

Q: Do you have a pellet fireplace insert that is 75%+ efficient?

A: Unfortunately at this time we do not have any pellet fireplace inserts that are 75+% efficient. However, please check back as we continuously add new product. If you have any further questions or would like to hear about other efficient pellet stove options, please call us and we will be happy to assist you. Thanks!

Q: Can I vent directly out the back? If not what’s the minimum amount of rise? Trying to vent out an exterior wall

A: Yes, this can be vented out of the back. Please refer to the Manual on page 11 figure D for installation horizontally through a wall to see how to install the venting. If you have any further questions, please call us and we will be happy to assist you.

Q: Can you get a replacement gasket for the door?

A: Please contact Breckwell directly at https://breckwell.com/contact/ or contacting US Stove at 1-423-837-2100. If you have any further questions, please call us and we will be happy to assist you.

Q: Will it burn corn?

A: This heater is designed to burn only PFI Premium grade pellets.

Q: Where do the pellets go?

A: The pellets are loaded through the top of the stove into the hopper. The hopper then feeds pellets into the main area to burn. The owners manual, linked below, is a great resource for more information on loading the hopper, capacity limits, etc... If you have any other questions please feel free to give us a call! Thank you.

Q: Need the blower?

A: Per the installation manual, pg. 27 number 23, this unit comes with a blower. URL: https://hvacdirect.com/media/pdf/sp24i-manual.pdf If you are needing a replacement blower, you will need to contact the manufacturer for the replacement part. The part number is 8064. You can contact Breckwell customer service at (800) 750-2723 or via email [email protected] If you have any further questions or need further assistance, please feel free to reach out to one of our experienced customer service representative and they would be happy to assist you. Thank you and have a wonderful day.

Q: My pellets are not dropping, why?

A: A tool has been provided to help with the following instructions: " Stirring pellets in hopper – unlike liquids in a tank, pellets do not drain evenly into the auger. Bridging across the opening can occur. Pellets can hang up on the sides of the hopper. Occasionally “stirring” the hopper can help. NOTE: To help prevent bridging of pellets, common wax paper can be rubbed on the side walls and bottom of the hopper." The hopper also needs to be cleaned, emptied and vacuumed at the end of each season. For further troubleshooting or questions pertaining to technical issues, please contact the manufacturer direct, via phone: 828-765-6144. If you have any further questions or need further assistance, please feel free to reach out to one of our experienced customer service representative and they would be happy to assist you. Thank you and have a wonderful day.

Did you find what you were looking for?