AllFuel HST 6-Inch Through The Wall With Single Wall Black Pipe Wood Stove Chimney Kit - BS-TEESBKIT-6
Required Fields *
By
AllFuel HST
In stock
Model
BS-TEESBKIT-6
ID
141564
In Stock - Ready to Ship
Was $2,352.90
Your Low Price $1,685.70
This kit includes equipment used to vent a wood stove up, out horizontally through a wall, using a tee to transition the chimney pipe back vertical for a single story installation.
The Kit Includes:
- Black Pipe Stove Adapter
- 2 - 18" To 30" Adjustable Black Pipes
- 18" Black Pipe
- 90 Degree Elbow Black Pipe
- Black Pipe To Class A Adapter
- Class A Wall Thimble
- Class A Tee With Cap
- 6" Class A Pipe Length
- 12" Class A Pipe Length
- 24" Class A Pipe Length
- 2 - 48" Class A Pipe Lengths
- Wall Base Support Bracket
- Adjustable Wall Support Bracket
- Chimney Cap With Mesh
***As individual installations may vary, it is possible that additional equipment is needed or that components may not be needed and returned if not used.
"AllFuel HST Stove Adapter for 6-Inch Diameter Single Wall Black Stove Pipe
Our single wall stove pipe is made of carbon steel and is painted black with high temperature paint for a beautiful finish.
The Stove Adapter connects to the collar on your wood stove or heating appliance and allows our single wall black pipe to be connected.
AllFuel HST 6-Inch Diameter x 18-Inch to 30-Inch Telescoping Single Wall Black Stove Pipe
Our 18" to 30" telescoping length of single wall black stove pipe allows you to easily adjust the length of pipe to fit. No cutting necessary.
Adjusts from 18" long up to 30" long.
Single wall stove pipe requires an 18" clearance to combustibles and can not be cut down.
AllFuel HST 90 Degree Elbow for 6-Inch Diameter Single Wall Black Stove Pipe
Our single wall stove pipe is made of carbon steel and is painted black with high temperature paint for a beautiful finish.
The 90 Degree Elbow is used making the turn for a through the wall installation.
Note: a straight installation is always best and elbow offsets should be used only when necessary.
AllFuel HST Stove Pipe Adapter for 6-Inch Inner Diameter Chimney Pipe
Use the Stove Pipe Adapter to connect single wall stove pipe to Class-A double wall insulated chimney. Made of 304 stainless steel and painted black to match your stove pipe. Can be painted any color with high temperature paint. Includes 1 Locking Band also painted black.
Product Features:
- Made of 304 stainless steel for superior corrosion resistance
- 0.019" thick inner and outer walls (17% thicker than our competition)
- High Density 1.18" thick ceramic fiber blanket insulation ensures no hot spots and no settling of insulation
- Precision Engineered Twist Lock connection for easy "no tools" assembly
- Locking Band included for a water tight seal between components
- Limited Lifetime Warranty
AllFuel HST Wall Thimble for 6-Inch Inner Diameter Chimney Pipe
The Wall Thimble is used for through-the-wall chimney installations. It protects the wall as the chimney passes safely through to the outside, and provides a finished look to the framed opening on the inside.
The Wall Thimble can adjust to accommodate walls from 6 to 10 inches thick.
AllFuel HST 6-Inch Inner Diameter x 6-Inch Long Class A Chimney Pipe
The 6" inner diameter x 6" Long double wall chimney pipe length is used to add length to your chimney stack and includes 1 Locking Band.
Product Features:
- Made of 304 stainless steel for superior corrosion resistance
- 0.019" thick inner and outer walls (17% thicker than our competition)
- High Density 1.18" thick ceramic fiber blanket insulation ensures no hot spots and no settling of insulation
- Precision Engineered Twist Lock connection for easy "no tools" assembly
- Locking Band included for a water tight seal between components
- Limited Lifetime Warranty
AllFuel HST 6-Inch Inner Diameter x 12-Inch Long Class A Chimney Pipe
The 6" inner diameter x 12" Long double wall chimney pipe length is used to add length to your chimney stack and includes 1 Locking Band.
Product Features:
- Made of 304 stainless steel for superior corrosion resistance
- 0.019" thick inner and outer walls (17% thicker than our competition)
- High Density 1.18" thick ceramic fiber blanket insulation ensures no hot spots and no settling of insulation
- Precision Engineered Twist Lock connection for easy "no tools" assembly
- Locking Band included for a water tight seal between components
- Limited Lifetime Warranty
AllFuel HST 6-Inch Inner Diameter x 24-Inch Long Class A Chimney Pipe
The 6" inner diameter x 24" Long double wall chimney pipe length is used to add length to your chimney stack and includes 1 Locking Band.
Product Features:
- Made of 304 stainless steel for superior corrosion resistance
- 0.019" thick inner and outer walls (17% thicker than our competition)
- High Density 1.18" thick ceramic fiber blanket insulation ensures no hot spots and no settling of insulation
- Precision Engineered Twist Lock connection for easy "no tools" assembly
- Locking Band included for a water tight seal between components
- Limited Lifetime Warranty
AllFuel HST 6-Inch Inner Diameter x 48-Inch Long Class A Chimney Pipe
The 6" inner diameter x 48" Long double wall chimney pipe length is used to add length to your chimney stack and includes 1 Locking Band.
Product Features:
- Made of 304 stainless steel for superior corrosion resistance
- 0.019" thick inner and outer walls (17% thicker than our competition)
- High Density 1.18" thick ceramic fiber blanket insulation ensures no hot spots and no settling of insulation
- Precision Engineered Twist Lock connection for easy "no tools" assembly
- Locking Band included for a water tight seal between components
- Limited Lifetime Warranty
AllFuel HST Tee with Clean-Out Cap for 6-Inch Inner Diameter Chimney Pipe
Use a tee with clean out cap for through the wall installations to make the 90 degree turn on the outside of the wall. The front opening of the tee connects to the length of Class-A chimney that passes through the Wall Thimble. The top opening of the tee connects to the rest of your vertical chimney stack. The bottom opening of the tee mounts to the Base Wall Support which supports the weight of the chimney stack on the outside of your home. The tee cap connects to the bottom side of the Base Wall Support to allow for easy cleaning of your chimney.
Product Features:
- Made of 304 stainless steel for superior corrosion resistance
- 0.019" thick inner and outer walls (17% thicker than our competition)
- High Density 1.18" thick ceramic fiber blanket insulation ensures no hot spots and no settling of insulation
- Precision Engineered Twist Lock connection for easy "no tools" assembly
- Locking Band included for a water tight seal between components
- Limited Lifetime Warranty
AllFuel HST Base Wall Support Kit for 6-Inch Inner Diameter Chimney Pipe
Use the base wall support kit to support the weight of the chimney stack in through the wall installations. The Base Wall Support consists of one base support and two triangle brackets. Mounting hardware is included to mount to an exterior wall. Supports up to 52' of chimney. The bottom of the base support is open and can be sealed with a Tee Cap (included with the Tee sold separately).
Product Features:
- Made of 304 stainless steel for superior corrosion resistance
- Mounting hardware included
- Open connector on bottom allows for the Tee Cap to be installed for easy cleaning (cap comes with 90 Degree Tee)
- Limited Lifetime Warranty
AllFuel HST Adjustable Wall Bracket for 6-Inch Inner Diameter Chimney Pipe
The adjustable wall bracket helps secure the chimney in place when mounted to a structure or wall and can be adjusted from 2" up to 7" away from the structure to help pass gutters or small overhangs in through the wall installations.
The adjustable wall bracket provides lateral stability while maintaining a 2" clearance to combustibles. It does not support the weight of the chimney system. A wall bracket is required a minimum of every eight feet of vertical height.
AllFuel HST Chimney Cap with Spark Screen for 6-Inch Inner Diameter Chimney Pipe
The rain cap with spark arrester tops off the chimney system to retain sparks and hot embers from escaping the chimney as well as to keep rain and snow, debris, and animals from getting inside the chimney.
Our chimney cap uses the same twist lock connection as the rest of our products to allow easy removal for cleaning. The spark guard mesh measures 3/4" to block hot embers from escaping but not being so small that it will clog up from creosote and ash.
Note: 3/4" mesh is not approved for use in California which requires 5/8" mesh.
Write Your Own Review
Customer Questions
