MATCH LIT fire pit burners are the most economical way to purchase a fire pit. In fire pit kits, a key is inserted into an included valve to turn the gas on and off. To light, one typically places a lit match or BBQ lighter over the burner and then turns the gas on. There are several kits available that are certified. Individual burner rings and individual components do not have a safety certification. We advise on checking with local codes prior to installing an uncertified product for guidance.
PUSH PUTTON FLAME SENSING fire pit kits are a safe and affordable way to operate your fire pit. They are lit very similar to a hot water tank. A Control knob is turned to the PILOT position. The Control knob is pushed in to release gas to the pilot light. Simultaneously pushing the continuous sparking ignition. Once the pilot flame is lit, the knob is held in for approximately 15 additional seconds. Once the flame sensing thermocouple is heated, the knob is released and turned to the ON position. This process takes roughly 30 seconds to get your fire pit lit safely. The fire pit can be turned back to the PILOT position to shut off or to off to completely shut the unit down until your next use. Should the flame or pilot blow out, the burner and pilot will turn off as a safety feature. These units are certified by CSA for residential and commercial use.
HEARTH PRODUCTS CONTROLS (HPC)
HPC engineers and manufactures high quality outdoor fire pit components such as fire pit burner elements in various shapes and sizes, both flat and bowl type pans that create the floor of a fire pit, the Control systems to operate and/or ignite the fire pits, and all related accessories. These components are installed into non-combustible fire pit structures (typically brick pavers, steel framing with hardie board, concrete, etc.) to create a fire pit that matches your outdoor living space. Fire pit burners are also incorporated into pre-made fire pit bodies for a more turn-key purchase. Each fire pit burner can be covered with lava stones of various types, lava rock and outdoor faux logs, or for a more contemporary look fire glass which is also available in many sizes, colors, and shapes. Most assembled kits pass rigorous CSA or UL testing however components can also be purchased ala carte. HPC makes the product and we can advise you or your contractor as to the best fit for your outdoor living space.
GAS FIRE PITS AND KITS
Fire pits are to be the centerpiece, the "kitchen table" of your outdoor living space. The warm glow of the fire pit can be enjoyed with guests or when we just need to relax and reflect on our days. Fire pits extend the time we can spend outdoors durning evenings or on chilly nights. Using a gas burning fire pit eliminates the hassle and mess of burning a wood fire. Gas Fire Pits come in a variety of colors, shapes, styles, and sizes. They are operated by either propane gas often used in tanks or can be connected to the natural gas lines that supply your home. Many fire pits come in kits with the fire pit body and burner for a turn key purchase. Fire pit burner kits are also available if you want to match your outdoor landscape. A non-combustible structure can be built to house a fire pit burner kit. We have certified, experienced staff available to help you select the best fire pit option for your project.
CSA Certified Match Light - Propane
Overview
Protect your outdoor space with the HPC Round 60" Ready To Finish Fire Pit Enclosure & Burner Kit with Match Light for Propane - UST60R/MLFPK25CEK-LP, a durable fire pit enclosure built for safety and visual appeal. This propane fire pit enclosure helps contain and protect your fire feature while maintaining proper airflow. Constructed from Ready To Finish, it provides excellent durability and long-lasting outdoor performance. The 60" size ensures proper coverage for your fire pit while maintaining a safe clearance. Its round design blends seamlessly with patios, decks, and backyard environments. Designed for both protection and style, it creates a polished and secure fire pit setup.
Key Features
Size: 60"
Shape: Round
Ignition: Match Light
Material: Ready To Finish
Certification: CSA
Warranty: 3-Year Limited Warranty
HPC CSA Certified Match Lit Ignition (MLFPK)
The user is required to insert and turn a removeable key into the key valve to allow gas to the burner and then the gas is lit directly with a lighter. Simply turn the decorative key to close the valve for shut off.
Advantages of Match-Lit Ignition (MLFPK)
Simple and affordable
Does not require electrical
Low maintenance and service
Limitations of the Match-Lit Ignition (MLFPK)
No flame sensing, so if the unit gets blown out the burner will still release gas
Not permitted for commercial and some residential installations
Maximum BTU output is 65K
Featured Videos
Push Button Flame Sense - Propane
Overview
HPC Round 60" Ready To Finish Fire Pit Enclosure & Burner Kit with Spark Ignition for Propane - UST60R/FPPK25CEK-LP is a stylish fire pit enclosure designed to enhance safety and add a modern touch to your outdoor fire feature. This propane fire pit enclosure helps contain and protect your fire feature while maintaining proper airflow. Constructed from Ready To Finish, it provides excellent durability and long-lasting outdoor performance. The 60" size ensures proper coverage for your fire pit while maintaining a safe clearance. Its round design blends seamlessly with patios, decks, and backyard environments. Perfect for enhancing safety while elevating the look of your outdoor fire feature.
Key Features
BTU: 150000
Size: 60"
Shape: Round
Ignition: Spark Ignition
Material: Ready To Finish
Certification: CSA
Warranty: 3-Year Limited Warranty
HPC Push Button Flame Sensing Ignition (FPPK)
With HPCÂ FPPK fire pit burner systems the the safety pilot valve is operated manually using the control knob. To light the fire feature, the control knob for the safety pilot valve is pushed in to allow gas to the pilot. The spark igniter button is then pushed to light the pilot flame. Once the pilot flame is lit, the control knob can be adjusted to control the height of the flame. While the fire pit is running, the thermocouple monitors the pilot flame and acts as a safety shut off.
Advantages of Push Button Flame Sensing (FPPK)
Does not require electricity to operate
Full flame sensing for safetyÂ
Flame height is adjustable
Limitations of Push Button Flame Sensing (FPPK)
Cannot be operated with a switch or remote control
This product can expose you to Chromium, which is known in the state of California to cause cancer, birth defects, and other reproductive harm. For more information about Proposition 65 please Click Here.
HPC Round 60" Ready To Finish Fire Pit Enclosure & Burner Kit with Match Light for Propane - UST60R/MLFPK25CEK-LP
This product can expose you to Chromium, which is known in the state of California to cause cancer, birth defects, and other reproductive harm. For more information about Proposition 65 please Click Here.
