AllFuel HST 8-Inch Flat Ceiling With Single Wall Black Pipe Wood Stove Chimney Kit - BS-FCSBKIT-8

Our single wall stove pipe is made of carbon steel and is painted black with high temperature paint for a beautiful finish.

The Stove Adapter connects to the collar on your wood stove or heating appliance and allows our single wall black pipe to be connected.

Our 8" diameter x 38" to 70" telescoping length of single wall black stove pipe allows you to easily adjust the length of pipe to fit. No cutting necessary.

Adjusts from 38" long up to 70" long.

Single wall stove pipe requires an 18" clearance to combustibles and can not be cut down.

Use the Stove Pipe Adapter to connect single wall stove pipe to Class-A double wall insulated chimney. Made of 304 stainless steel and painted black to match your stove pipe. Can be painted any color with high temperature paint. Includes 1 Locking Band also painted black.

Product Features:

• Made of 304 stainless steel for superior corrosion resistance
• 0.019" thick inner and outer walls (17% thicker than our competition)
• High Density 1.18" thick ceramic fiber blanket insulation ensures no hot spots and no settling of insulation
• Precision Engineered Twist Lock connection for easy "no tools" assembly
• Locking Band included for a water tight seal between components
• Limited Lifetime Warranty

The 11" Square Ceiling Support Box provides safe passage of double wall chimney pipe through your floor or ceiling and supports the weight of the chimney in through the ceiling installations.

The Ceiling Support Box can support a maximum of 50-ft of chimney pipe and includes trim to provide a finished look inside the room. The support box and trim is painted black to match the black single wall stove pipe.

Attached to the bottom of the ceiling support box is a twist lock connection for the Stove Pipe Adapter to connect (sold separately). The support box and trim is painted black.

Product Features:

The adapter section of our Ceiling Support Box's are made of 304 stainless steel while the box itself is made of galvanized steel (as it is not exposed to any corrosive elements).

• 304 stainless steel/galvanized steel

CERTIFICATION

Certified and listed to the UL 103HT standard and designed for appliances that are listed for use with a 2100 Degree Fahrenheit High Temperature chimney system. It can be used with wood stoves, fireplaces, fireboxes, furnaces, boilers, water heaters, pizza ovens and other residential heating appliances fueled by wood, gas, coal or oil.

Note: Do not use with forced draft, positive-pressure appliances.

The UL 103HT chimney is designed and tested for maximum continuous use at 1000 degrees Fahrenheit. UL certification requires a stringent and rigorous test including a one hour burn at 1400 degrees Fahrenheit and three - ten minute burns at 2100 degrees Fahrenheit.

CLEARANCE TO COMBUSTIBLE MATERIALS

Always keep at least a 2-inch clearance between chimney pipe and any combustible materials.

The 8" inner diameter x 48" Long double wall chimney pipe length is used to add length to your chimney stack and includes 1 Locking Band.

Product Features:

• Made of 304 stainless steel for superior corrosion resistance
• 0.019" thick inner and outer walls (17% thicker than our competition)
• High Density 1.18" thick ceramic fiber blanket insulation ensures no hot spots and no settling of insulation
• Precision Engineered Twist Lock connection for easy "no tools" assembly
• Locking Band included for a water tight seal between components
• Limited Lifetime Warranty

The attic insulation shield is used in through the ceiling installations to prevent insulation and other debris from contacting the chimney in the attic.

The attic insulation shield is placed above the Ceiling Support Box on top of the framing of the ceiling where the chimney passes through the attic. If the chimney is fully enclosed in a chase the attic insulation shield is not required. Includes 1 Storm Collar.

The 1/12-6/12 roof flashing provides leak proof penetration of the roof. Our flashings can be used in both vented and fully sealed applications (including sealed chase installations).

A Storm Collar, sold separately, is required to seal the flashing.

Product Features:

Our roof flashings are made of 304 stainless steel to deliver superior safety and performance.

• 304 stainless steel
• Vented top for versatility of installation
• Precision Engineered for a perfect fit

CERTIFICATION

Certified and listed to the UL 103HT standard and designed for appliances that are listed for use with a 2100 Degree Fahrenheit High Temperature chimney system. It can be used with wood stoves, fireplaces, fireboxes, furnaces, boilers, water heaters, pizza ovens and other residential heating appliances fueled by wood, gas, coal or oil.

Note: Do not use with forced draft, positive-pressure appliances.

The UL 103HT chimney is designed and tested for maximum continuous use at 1000 degrees Fahrenheit. UL certification requires a stringent and rigorous test including a one hour burn at 1400 degrees Fahrenheit and three - ten minute burns at 2100 degrees Fahrenheit.

CLEARANCE TO COMBUSTIBLE MATERIALS

Always keep at least a 2-inch clearance between chimney pipe and any combustible materials.

The storm collar works together with the Roof Flashing to provide a waterproof seal where the chimney passes through the roof.

The storm collar is installed directly above the flashing and must be sealed to the chimney pipe using high-temperature silicone sealant (RTV 500F or better), sold separately.

The rain cap with spark arrester tops off the chimney system to retain sparks and hot embers from escaping the chimney as well as to keep rain and snow, debris, and animals from getting inside the chimney.

Our chimney cap uses the same twist lock connection as the rest of our products to allow easy removal for cleaning. The spark guard mesh measures 3/4" to block hot embers from escaping but not being so small that it will clog up from creosote and ash.

Note: 3/4" mesh is not approved for use in California which requires 5/8" mesh.